Used equipment
Used pallet racks, inspected before it ships
Used racking is the fastest way to cut a storage budget — as long as the steel is sound and you can prove its capacity. We source teardown material from DFW closures, consolidations, and relocations, and we tell you plainly when used is the wrong call.
Inspection
What we reject
Damaged rack is not a discount, it's a liability. Any component with the following goes to scrap rather than into your building:
- Bent, twisted, or previously repaired uprights and diagonals
- Deformed beam connectors or torn safety-clip holes
- Elongated or cracked footplates and missing anchor holes
- Beams with permanent deflection after unloading
- Mixed manufacturers within a single bay (connectors are not interchangeable)
- Material with no identifiable make, series, or capacity reference
Typical availability
Common used specs
Availability changes weekly. These are the sizes that most often come out of DFW buildings, which means they're also the easiest to match later when you expand.
| Upright heights | 12', 14', 16', 18', 20' most common |
|---|---|
| Upright depths | 42" and 48" |
| Beam lengths | 96" and 144" step beams |
| Beam faces | 4" and 5" — sets capacity per pair |
| Decking | Waterfall wire deck, 42" x 46" |
| Condition grades | Grade A (near-new) and Grade B (usable) |
Straight answer
When used is the wrong choice
Seismic or engineered installs
If the permit set requires stamped calculations, unknown-capacity steel creates a problem that costs more than the savings.
Very large single orders
Matching 500+ bays of identical used spec is rare. Mixed lots slow installation and complicate load labeling.
Tight, fixed deadlines
Used supply is opportunistic. If your occupancy date can't move, new steel with a confirmed ship date is safer.
Used pallet rack FAQs
How much cheaper is used pallet racking?
Expect roughly 30–50% below comparable new steel, depending on grade and how common the size is. The savings shrink when a lot needs new decking, new hardware, or heavy sorting.
Can you document capacity on used racking?
When the manufacturer and series are identifiable, we reference published capacity tables for the frame, beam face, and beam spacing you're installing, and label the loaded system accordingly. Unidentifiable steel is not worth buying at any price.
Do you buy racking from closing warehouses?
Yes — teardown and buyback is part of how we source. If you're consolidating or vacating a DFW building, send photos and bay counts and we'll quote removal.
Tell us the pallet positions you need
Send your pallet size, weight, and target bay count and we'll check current used availability against new pricing side by side.